Our customer is having a communication problem with ADS5287 and he is looking for an application notes regarding the initialization sequence of configuration registers. Do we have a sample code for ...

In SN74LVC8T245 ,Input transition rise or fall rate is showed below, as my case,VCCI=1.8V,that is to say the max rise time is 1.8*20=36ns? If the rise time of the signal into the part is 80ns，what ...

Good day. I am working with the AMD Xilinx ZCU208 RFSoC Development Kit, which has an LMK04828 that I am trying to interface to with an external Orolia SecureSync 2400 10 MHz reference clock. The ...

I was hoping to get the specifications/datasheet for the 7840-08-0015 Nova Transformer labeled T1 on the BOM, specifically the 1.2 mH, with description: Transformer, Phase Shifted Full Bridge.

I am using MSP part for as a master for IC communication. I came across a form "Application to Use Texas Instruments Incorporated UNIVERSAL SERIAL BUS VENDOR ID". When we need to get this one - if we ...

The datasheet and register map description shows two different formulas to calculate the INSTCAL_DLY value. In the Register Map document (snau251a.pdf) Page 8, INSTCAL_DLY = T x fOSCIN / (2CAL_CLK_DIV ...

I have come across SBL boot in MCU+SDK that it has a secure boot support. My question is in an AM62X platform for a fully secured device (HS-SE), if it is possible to use the M4F core with full ...

I`m using CSD17308Q3 Pspice model to simulate in cadence/virtuoso_spectre, it report "Cannot run the simulation because the syntax error `Unexpected end of file ...

This macro needs to be defined in case both bitfield headers & driverlib are used in a project in order to avoid conflict.

i am working on a circuit which determines whether the battery is healthy or not using led, i have drawn the circuit on tina ti but i am not able to identify how to simulate the circuit and how to see ...

First, welcome to the TI E2E community. Unfortunately, there are no Verilog or VHDL models available, only IBIS and SPICE models. The SPI interface follows the industry standard mode 3, CPOL=1, CPHA=1 ...

I have the following issue when integrating SDK 7.03 onto RVP: Basically I only managed to get camera streaming working for channel #0. It doesn't work for channel #1,#2, etc. I don't know if it is a ...